Scuba Diving: How to Assemble Equipment

28 59

Rating: 4.72

28 Comments
  1. Jetlp Bland says

    Wish i was there to swim

  2. Ny Chan says

    Thanks was wondering how to set bcd and tank valve height .

  3. Travmunger says

    I feel like this is a really weird video to be in watchmojo compared to the videos they make now lol

  4. Fügungsresistent says

    That was 100% of what I was looking for a quick reminder after some month, Nice!

  5. Tempest Rage says

    Holy shit never turn your valve back a quarter turn it can bite you in the ass a depth because it needs full pressure to deliver the air bad bad practice!!

  6. Michael Pachos says

    a video made just for the views…. wrong in so many ways

  7. Marilu Carvallo says

    When it comes to tank valves, there are only two options, open or closed, nothing in between.

  8. WEI GAO says

    she is cuter than her voice.lol

  9. Robbie McGill says

    Bad attachment of reg, the point of the yoke screw should be put into the dimple of the tank valve first then screwed up, this will cause the regulator to be pulled straight on to the "O" ring, seating it correctly … this is basic scuba, and engineering !!!

  10. Tw1ch says

    S…

  11. JCA ELITE SCUBA says

    OMG…!!! This guy missed so much and some of the information is flat out, 100% wrong! This video has a complete assembly: https://youtu.be/wCW8eHiMaJU

  12. The_Black_Rose says

    49 Seconds in and already that's 2 idiot mistakes., OK spotted in total 3 Idiot mistakes… Anyone do better ? I hope this Fool isn't teaching diving.

  13. Eric danis says

    Hi

  14. Alex Supremo says

    Author, you didn't check if you can actually BREATHE from your primary or alternate regulator, and didn't try inflating and deflating your BCD. Sorry to say, but this video is dangerous if anyone were to follow your instructions.

  15. Nick Wilcox says

    Joe still work there ?

  16. Connor Cunningham says

    WARNING!!! YOU CAN NOT SCUBA DIVE IF YOU DONT HAVE A LICENCE, IT IS VERY DANGEROUS AND YOU CAN GET HARMED DOING IT!!! (you must always have a buddy with you)

  17. Lauren Levengood says

    Could've sworn Brad Pitt was teaching me how to assemble my scuba gear.

  18. Joey says

    this guy sounds like brad pitt.. lol

  19. ryama86 says

    fucking CYLINDER!!!

  20. Damian Jones says

    This is a video on setup of scuba equipments and explaining all necessary steps before scuba diving. Keep sharing such information.

  21. Ella JB says

    Thx this really helped

  22. Guppy Stradt says

    Scheisssssssseeewwwwwww

  23. AvidDiving says

    If you need to do a valve drill underwater, and tern the valve 1/4 and it locks that means that it was on and that the other way is off. if you dont do that, you could think that because you cant tern the valve from the start, the tank must me off. making u accidentally close the tank valve. :/

    Also i think it also has t do with the O-ring in the valve opening it all the way may have negative effects on that ring.

  24. calibermoon says

    Why go back 1/4 turn? So it doesn't get stuck under pressure?

  25. BradBaldwintheDrumm says

    very good! testing the regulators would be standard right?

  26. N8Ryder says

    This isn't a full training video, in fact it's probably good all the details aren't shown. If people want to learn to dive and do everything then they need to go get certified properly!!!

  27. ewtoov says

    Good.. But forgot to check if bcd works properlly; including auxiliary deflating valve.
    And what about checking both regulators??

    Basic man, & Im like a junior open water 😉

  28. Cornelius Ofdark says

    Very helpful. Keep posting about scuba diving.

Leave A Reply

Your email address will not be published.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept