SCUBAPRO Triple Gauge –

1 43

The Scubapro Triple Gauge is a streamlined pressure gauge console with depth gauge and compass so all of your information is in one place at a glance. The pressure gauge displays cylinder pressure up to 400 bar (300 bar working pressure) with 0-50 bar clearly marked in red.

The analogue depth gauge uses a clear scale to show actual depth to a maximum of 60m. The gauge shows 3 and 6m as red dots to indicate these critical safety stop depths and 40 – 60 as shown in solid red to indicate the limits of recreational diving and beyond. The gauge also features an analogue maximum depth needle to record the deepest point since last reset.

The compass allows easy underwater navigation whilst still allowing complete visibility of all other gauges. A side viewing window in the console ensures accurate reading whilst moving and the swivelling bezel allows the diver to set bearings.

All the gauges are housed within a robust protective rubber boot with loops at the end and either side of the high pressure hose to allow for retaining clips or retractors to be fitting to the console.

Hose Length: 31.5″ (approx)

To browse our huge range of top brand Scuba gear and equipment for all ages, with fast shipping and 28 day returns, visit

For more helpful product videos plus expert swimming advice, head to

Rating: 5.00

1 Comment
  1. Kevin Afton says

    In which direction should we set the maximum depth gauge back to zero?

Leave A Reply

Your email address will not be published.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept